14
RESISTNCE ADJUSTMENT
To adjust the pedaling resistance during use, start by turning the Tension Controller Knob (15) fully
COUNTER-CLOCKWISE at the start of your workout. Gradually increase the pedaling resistance by
turning the Tension Controller Knob CLOCKWISE as required.
When you have finished your routine, turn the Tension Controller Knob (15) fully COUNTER-
CLOCKWISE again to ensure that the Tension Controller Cable is not under tension when your
Magnetic Bike is not in use.
Note:
There may be a small amount of built in resistance present at first due to the general tight fit of
the new bearings, bushes and the drive belt.
The foot print for this product is 835mm x 475mm.
The assembled weight is 20.34 kg
