![background image](http://html1.mh-extra.com/html/insportline/gemini-r200/gemini-r200_user-manual_2069010015.webp)
CONSOLE OPERATION INSTRUCTIONS
DISPLAY INTRODUCTION
This is a LED display console, and the functions shown include: RPM, SPEED, TIME, CALORIES,
DISTANCE, WATTS, LEVEL, dot matrix display of the PROGRAM graph.
DISPLAY AND START-UP OF THE BOOT WINDOW
1. Standby mode
After the console starts to light up, dot matrix display shows Metric or British unit (
“
KM
”
or
“
ML
”
) to
the U1 graphic. You can choose U1
–
U4.
2. Sleep mode
When the console is on and RPM is lower than 30 or there is no key operation within 15 seconds, the
program will enter the prompt mode for 16 seconds (after 16 beeps the scale enters the sleep mode).
During the timing period of 16 seconds, if RPM is higher than 30 or you press any key, the timing
program of 16 seconds will be cancelled. The console will go back to the standby mode.
In the setting page (User setting, weight setting and settings in all programs), if RPM is lower than 30
for 10 seconds, the program will end and jump back to the standby mode. If RPM is still lower than 30
or no key operation is detected after 5 seconds, the program will enter prompt for 16 seconds (after 16
beeps the scale enters sleep mode). During the timing period of 16 seconds, if RPM is higher than 30
or you press any key, the timing program of 16 seconds will be cancelled, and the console will go back
to standby mode.
When operating all the programs and RPM has not been reached to 30: dot matrix display will
show the rolling string of
“RPM↑”
for 5 seconds. After that, if the RPM still not reached to 30, dot
matrix display will show the rolling string of
“
PAUSE
”
for 5 seconds.
KEY INSTRUCTIONS
START
: Press the key
“
START
”
and the program will start the
“
QUICK START
”
function
directly.
RECOVERY
: During the exercise, hold the hand pulse sensor until the PULSE window shows
the heart rate value, and then press
“
RECOVERY
”
. The displays will stop and the TIME window will
show count down for 60 seconds. After the time countdown to
“
0
”
, the display will show the result of
your heart rate recovery status with F1~F6. F1 means the best level of the heart rate recovery status.
15