11
12
9
System Setting
Touch system setting area can page up system settings.
1
.
Master results display and slave results display
2
.
BPS rate setting
The BPS rate of communication between instrument and printer or
between instrument and APP of mobile phone.
Default BPS rate 115.2K
3
.
Auto shutdown
Set to ON instrument for 600 seconds without operation will be
automatically shutdown . When OFF is set, it will work all the time.
4
.
Bluetooth mode
There are 2 mode to operate Bluetooth module, print mode and
data transmission mode.
Set it to print when Bluetooth printing is needed and to Ctrl when
communicating with mobile APP
Bluetooth switch can only be operated when Bluetooth power is off.
5
.
Bluetooth Power
Please set the Bluetooth mode first, then turn ON the Bluetooth
power, the instrument will automatically set the Bluetooth module
as required.
Because of the unnecessary battery capacity loss caused by the
long-term opening of the Bluetooth function, the instrument will turn
off the Bluetooth power after each boot. If you need to use
Bluetooth function, please open it yourself.
6
.
Touch Screen calibration
When the instrument is manufactured, the touch screen has been
calibrated. Generally, calibration is no longer required, but the
physical parameters will change over time. If you find that the
button is not correct, please calibrate again. Please follow the
screen prompts.
