Insignia IS-TV040925 Owner'S Manual Download Page 5

Page: 5 / 32

ENGLISH

4. SLEEP Button -

To set the TV to turn off after a preset

amount of time, press the SLEEP button. The clock will
count down 10 minutes each time the button is pressed in
the order of 120, 110, 100, ······ 20, 10, 0. After the sleep
time is programmed, the display will disappear then
reappear momentarily every ten minutes to remind you the
sleep timer function is operating. To confirm the sleep time
setting, press the SLEEP button once and the remaining
time will be momentarily displayed. To cancel sleep time,
press the SLEEP button repeatedly until the display turns
to 0.

5. VOL (VOLUME)

Buttons -

Press the button to

increase, or the

button to decrease the volume level.

6. MENU Button -

Press to display the On-Screen menu

function.

7. SET – / + Buttons -

Press to select the desired setting

during On-Screen operations.

8. RESET Button -

Press to reset the On-Screen picture

adjustments to their factory preset positions.

9. TV/AV Button -

Switches between TV and external inputs.

10. CALL Button -

When you press this button, the channel

number will appear in the upper right corner of the screen.
Press the button again to remove display from the screen.

11. MUTE Button -

To turn off the sound, press this button

once. The TV will be silenced and the symbol “MUTE” will
appear on the screen. The muting feature can be released
by pressing the MUTE button again or one of the VOL

button.

12. CH (CHANNEL)

Buttons -

Press the

button to

change to a higher numbered channel set into memory.
Press the

button to change to a lower numbered channel

set into memory.

13. ENTER Button -

Press to enter or select information for

On- Screen operations.

14. AUDIO SELECT Button -

Switches sound between mono

and stereo when receiving broadcasts in stereo.

15. CH.1/2 Button -

Switches between Channel 1 and Channel 2

in the Closed Caption mode.

16. TV/CAP/TEXT Button -

Press this button to switch between

normal TV and the two Closed Caption modes (captions
and 1/2 of full screen text). Closed Captioning will display
text on screen for hearing impaired viewers.

1. POWER Button -

Press to turn the TV on. Press again to

turn the TV off.

2. Direct Channel Selection Buttons (0-9) -

Allows direct

access to any channel.

3. QUICK VIEW Button -

This button allows you to go back

to the previous channel selected by just pressing the
QUICK VIEW button. Press this button again to return to
the channel you were watching.

1. Open the battery compartment cover.

2. Install two “AAA” batteries (not supplied).

HOW TO INSTALL BATTERIES

Before using the remote control, batteries must first be installed.

3. Replace the battery compartment cover.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries
in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing the

batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g.

Alkaline and Carbon-zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time,

remove the batteries to prevent damage or injury from
possible battery leakage.

• Do not try to recharge batteries not intended to be

recharged; they can overheat and rupture (follow battery
manufacturer's directions).

Use two “AAA” size batteries. The batteries may last
approximately one year depending on how much the remote
control is used. For best performance, it is recommended
that batteries should be replaced on a yearly basis, or when
the remote operation becomes erratic. Do not mix old and
new batteries or different types.

REMOTE CONTROL

MENU

VOL

SLEEP

MUTE

QUICK VIEW

CALL

VOL

ENTER