INSIGHT 4K Dual LED Series Installation And Quick Start Manual Download Page 59

Page: 59 / 84

page 53

Digital Projection INSIGHT 4K Dual LED & Quad Series

Reference Guide

POSITIONING THE IMAGE

Rev B June 2016

Any single adjustment outside the ranges specified on the following page may result in an unacceptable level of distortion, particularly at the

corners of the image, due to the image passing through the periphery of the lens optics.
If the lens is to be shifted in two directions combined, the maximum range without distortion will be somewhat less, as can be seen in the

illustrations below.

Notes

For more information on shifting

the lens, see

Keypad And Remote

Control

in the

Operating Guide

Full horizontal or vertical shift

Combined shift is reduced

Summary of Contents for 4K Dual LED Series





















































































Search results

Summary of Contents for 4K Dual LED Series

Reviews:

Related manuals for 4K Dual LED Series

Brands by name

Popular brands

INSIGHT 4K Dual LED Series, Installation And Quick Start Manual

Search results

Summary of Contents for 4K Dual LED Series

Reviews:

Related manuals for 4K Dual LED Series

Brands by name

Popular brands