INSIGHT 4K Dual LED Series Installation And Quick Start Manual Download

Page: 26 / 84

page 20

Digital Projection INSIGHT 4K Dual LED & Quad Series

Installation and Quick-Start Guide

CLEANING AND REPLACING THE FILTERS, DUAL LED

Rev B June 2016

Mount the air filter to the projector.

Look for an arrow indicating the installation direction

on the side of the air filter. Point the arrow towards

the projector.

5. Mount the front cover to the projector. Tighten the

two captive screws to secure the cover.

Notes

The information

on this page refers to

NSIGHT 4K Dual LED

The arrow may appear different from

the illustration.

Before changing the filters,

always make sure the projector

is switched off and fully

disconnected from its power

supply.

When changing the filters, avoid

using excessive force as this may

damage the equipment.

Filters should be replaced as

necessary upon visual inspection

and in accordance with operating

environment.

Summary of Contents for 4K Dual LED Series





















































































Search results

Summary of Contents for 4K Dual LED Series

Reviews:

Related manuals for 4K Dual LED Series

Brands by name

Popular brands

INSIGHT 4K Dual LED Series, Installation And Quick Start Manual

Search results

Summary of Contents for 4K Dual LED Series

Reviews:

Related manuals for 4K Dual LED Series

Brands by name

Popular brands