Inseego Wavemaker PRO FX2000e, User Manual

Page: 63 / 84

5G INDOOR CPE FX2000e USER GUIDE 63
The following table provides port numbers and protocol information for each port filtering application
listed.
Application Name Port TCP
*
STCP
*
UDP
*
Email
POP3
POP3S 110
995 Yes
Yes No
No Assigned
Yes
IMAP
IMAPS 143
993 Yes
Yes No
No Assigned
Assigned
SMTP
SecureSMTP 25
465 Yes
Yes No
No Assigned
No
FTP control (command)
FTP data transfer 21
20 Yes
Yes Yes
Yes Assigned
Assigned
HTTP 80 Yes Yes Assigned
HTTPS 443 Yes Yes Assigned
Telnet 23 Yes No Assigned
Custom Applications
Use the
Add Custom Application
button to add a new row to the custom application list.
On: Check this box if you want the new application to be able to access the Internet.
App Name
: Enter a name for the custom application.
Start Port: Enter the beginning of the range of port numbers used by outgoing traffic for the
custom application being added.
End Port:
Enter the end of the range of port numbers used by the application .
NOTE:
If the application uses a single port instead of a range, type the same value for both the
Start Port
and the
End Port
.
Protocol:
Select the protocol used by the port range from the drop-down list (TCP, UDP, or both).
Delete:
Check this box to delete a custom application.
NOTE:
Click on the Port Filtering tab again
to remove deleted custom applications from view on the screen.
Click
Save Changes
to save any changes made to the custom applications.
*
Yes indicates the protocol is standardized for the port number.
No indicates the protocol is standardized for the port number.
Assigned indicates the port number is assigned by IANA (Internet Assigned Numbers Authority) for protocol use, but
may not be standardized.