Inseego Wavemaker PRO FX2000e, User Manual

Page: 65 / 84

5G INDOOR CPE FX2000e USER GUIDE 65
Port Forwarding
Port Forwarding:
To turn on port forwarding, move the
ON/OFF
slider to
ON
. To turn off port
forwarding, so that no inbound traffic is forwarded to a LAN client, move the slider to
OFF
.
Applications
Check the box next to each Port Forwarding application that you want to allow.
To forward all inbound WAN traffic on a specific port to a single LAN client, enter the IP address of the
target device in the
Application IP Address
field.
The following table provides port numbers and protocol information for each port forwarding
application listed.
Application Name Port TCP
*
STCP
*
UDP
*
DNS 53 Yes No Yes
FTP control (command)
FTP data transfer 21
20 Yes
Yes Yes
Yes Assigned
Assigned
HTTP
HTTPS 80
443 Yes
Yes Yes
Yes Assigned
Assigned
NNTP 119 Yes No Assigned
POP3
POP3S 110
995 Yes
Yes No
No Assigned
Yes
SMTP
SecureSMTP 25
465 Yes
Yes No
No Assigned
No
SNMP 161 Assigned No Yes
Telnet 23 Yes No Assigned
TFTP 69 Assigned No Yes
*
Yes indicates the protocol is standardized for the port number.
No indicates the protocol is standardized for the port number.
Assigned indicates the port number is assigned by IANA (Internet Assigned Numbers Authority) for protocol use, but
may not be standardized.