Inseego Wavemaker PRO FX2000e User Manual Download

Page: 11 / 84

5G INDOOR CPE FX2000e USER GUIDE

Connecting Devices with Ethernet

You can connect wired devices such as laptops, printers, and gaming consoles via Ethernet.

To connect Ethernet devices:

Plug one end of an Ethernet cable into the LAN port on the FX2000e.

Plug the other end of the cable into the Ethernet port of the device you wish to connect.

Devices plugged into the FX2000e via Ethernet have instant access to the Internet.

Connecting Devices with USB

You can tether to a device with the USB-C port.

Connect the USB-C end of a USB cable into the USB-C port on the FX2000e. Or, connect a
wireless USB-C adapter

Connect the USB-A end of a USB cable into the device you wish to connect.

Summary of Contents for Wavemaker PRO FX2000e





















































































Search results

Summary of Contents for Wavemaker PRO FX2000e

Reviews:

Related manuals for Wavemaker PRO FX2000e

Brands by name

Popular brands

Inseego Wavemaker PRO FX2000e, User Manual

Search results

Summary of Contents for Wavemaker PRO FX2000e

Reviews:

Related manuals for Wavemaker PRO FX2000e

Brands by name

Popular brands