Inovonics DAVID IV 719 N Installation & User Manual Download Page 53

Page: 53 / 61

— 49 —

Open the

Dynamic DNS

menu and click in the

Mode:

area to ex-

pose the drop-down menu shown here. Note that three DNS-

forwarding services are named

here. We advise to choose one

of these as they have proven

most dependable over time.

Type any of these names into a

Web browser to learn the fea-

tures and cost of their respec-

tive services.
The three fields:

Hostname

Username

and

Password

must be

filled-in with the information you receive when you register on

the provider’s Website. Type this information into the three

fields. Alternatively, this information may of course be entered

somewhat laboriously using the front-panel jog-wheel knob un-

der:

Setup

Network

Dynamic DNS

Dynamic DNS

System Abuse

The DAVID IV will normally communicate with the provider on-

ly when the IP address changes, but it also must check-in fol-

lowing a power interruption and whenever the Dynamic DNS

mode is altered in any way.

Some small part of the forwarding provider’s processing re-

sources is used each time an IP address is renewed. These pro-

viders, especially the for-free ones, don’t appreciate repeated

and unnecessary IP address renewals. If a particular account

makes a nuisance of itself, the provider may justifiably cut the

user off. In that case the entire Dynamic DNS registration and

setup process will have to be repeated.

SNMP NOTES

SNMP (Simple Network Management Protocol) allows other

TCP/UDP/IP equipment on the same Local Area Network (LAN)

to communicate directly with the DAVID IV, and for the unit it-

self to initiate an alarm to other equipment on the network.
This is an abbreviated discussion of SNMP operation. SNMP is a

powerful and complex utility, managed exclusively by whatever

SNMP Manager (monitoring equipment) is employed. Refer to

all instructions supplied with Manager hardware for setup, and

consult additional resources for a more complete understand-

ing of SNMP features and protocols.

The SNMP

Manager

and MIB File

Under SNMP operation, the DAVID IV will interface directly with

a network controller, the SNMP Manager. The DAVID IV has an

embedded ASCII text file call a Management Information Base,

or MIB. In setting up for SNMP operation, the MIB file will have

to be downloaded from the DAVID IV through the Web inter-

face and uploaded to the SNMP Manager as described shortly.

Summary of Contents for DAVID IV 719 N






























































Search results

Summary of Contents for DAVID IV 719 N

Reviews:

Related manuals for DAVID IV 719 N

Brands by name

Popular brands

Inovonics DAVID IV 719 N, Installation & User Manual

Search results

Summary of Contents for DAVID IV 719 N

Reviews:

Related manuals for DAVID IV 719 N

Brands by name

Popular brands