Chapter 5 Parameter Description
- 89 -
Parameter No.
Function
Parameter No.
Function
7
Reserved
15
Reserved
Group FP: User Parameters
Parameter
No.
Parameter Name
Setting Range
Default
Unit
Property
FP-00
User password
0–65535
0
-
☆
It is used to set user password.
If FP-00 is set to a non-zero value, the password protection function is enabled. You can
enter the parameter setting menu to view or modify parameters only after entering the
correct password. The password protection function can be disabled by setting FP-00 to
00000.
NOTE
◆
Remember the password you set. If you set the password incorrectly or
forget your password, contact Inovance to replace the GCB.
Parameter
No.
Parameter Name
Setting Range
Default
Unit
Property
FP-01
Parameter
initialization
0–1
0: No operation
1: Restore default
settings
0
-
☆
It is used to reset system parameters.
The values are as follows:
0: No operation
1: Restore default settings
Parameter
No.
Parameter Name
Setting Range
Default
Unit
Property
FP-02
User-defined
parameter checking
0–1
0
-
☆
It is used to view the parameters different from default parameters. If FP-02 is set to 1,
you can view the parameters different from default parameters.
5.2 Description of Floor Selector Parameters
Group F0: Display Parameters
Parameter
No.
Parameter Name
Setting Range
Default
Unit
Property
F0-00
Floor address of the
floor selector
0–56
0
-
☆
0: Invalid
Values 1 to 56 correspond to floors 1 to 56 respectively.
