Chapter 3 System Commissioning
- 43 -
1
2
3
4
5
6
7
8
9
★
0
—
5
1
2
3
4
5
6
7
8
9
★
0
—
c
Example 2: Three passengers need to take an elevator to floor 5 and press 5 on the
floor selector. After that, they enter
"
"
and the number of passengers
"
3
"
. Then,
"
D>>
"
is displayed on the screen to instruct the passengers to wait for elevator D on the right
side, as shown in the following figure.
1
2
3
4
5
6
7
8
9
★
0 —
5
☆
3
1
2
3
4
5
6
7
8
9
★
0 —
1
2
3
4
5
6
7
8
9
★
0 —
5
1
2
3
4
5
6
7
8
9
★
0 —
D
D
3.3.5 Selecting a Destination Floor by the Disabled
Step 1: Press the disability key on the floor selector and the screen displays the
international symbol of access wheelchair symbol
.
Step 2: Enter the destination floor.
■
During floor selection, the interval between two keys are pressed must be smaller
than the input delay time specified by F1-01 (Key pressing interval for disabled
people). The earlier input and the later input together forms the number of a floor.
If no key is pressed within the time specified by F1-01 (Key pressing interval for
disabled people), the earlier input is regarded as the destination floor.
■
If a passenger enters an invalid floor number, the floor selector gives a voice prompt
"
Please select another floor
"
. An invalid floor may be the current floor or a non-
service floor of the GCB.
Step 3: After a passenger selects a valid floor, the floor selector displays the ID and
location of the assigned elevator.
For example, when a disabled passenger needs to take an
elevator to floor 5, the
passenger presses
and number
"
5
"
on the floor selector. Then,
"
E>>
"
is displayed
on the screen to instruct the passenger to wait for elevator E on the right side, as shown
in the following figure.
