Inovance MD320 Series, User Manual

Page: 102 / 202

Parameter Description MD320/MD320N User Manual
There are totally four groups of acceleration/deceleration time for selection.
Group 1: F0-17 and F0-18;
Group 2: F8-03 and F8-04;
*URXS)DQG)
Group 4: F8-07 and F8-08;
It can select acceleration/deceleration time via the multifunctional digital input terminals (F4-00
to F4-08).
Group F1 Motor Parameters
F1-00
Motor type selection
Factory default value 0
Setup range
0 common asynchronous motor
1 Variable frequency asynchronous motor
2 Permanent magnetic synchronous motor (reserved)
F1-01
Rated power Factory default value model dependent
Setup range
N:aN:
F1-02
Rated voltage
Factory default value 380V
Setup range
9a9
F1-03
Rated current Factory default value model dependent
Setup range
$a$
F1-04
Rated Frequentcy Factory default value model dependent
Setup range
+]aPD[LPXPIUHTXHQF\
F1-05
Rated rotation speed Factory default value 1460rpm
Setup range
USPaUSP
Caution
1. Please set the parameters according to the nameplate parameters of the motor.
2. It needs accurate motor parameters to ensure the excellent control performance of the
vector control. Accurate parameter identification comes from the correct setting of the
rated motor parameters.
7RHQVXUHWKHFRQWUROSHUIRUPDQFHSOHDVHFDUU\RXWPRWRUFRQ¿JXUDWLRQVLQDFFRUGDQFH
with the standard adaptable motor of the inverter. If there is huge difference between the
PRWRUSRZHUDQGWKHSRZHURIVWDQGDUGDGDSWDEOHPRWRUWKHFRQWUROSHUIRUPDQFHRIWKH
inverter will decrease obviously.
efesotomasyon.com