Inovalley CH02E-DVBT, Instruction Manual, Page: 34 / 36

DVB-T Operation
4.1 Receiver Information
Enter Receiver Information to check the information of the DVB-T receiver .
Press [Exit]/[Menu] to exit.
4.2 Game
There are three games offered by this system. Use [ ]/[ ] to select your preferred game and
press [ENTER]. Follow the on-screen instructions to play the games.
Press [Exit]/[Menu] to exit.
4.3 Load Factory Default
Users are required to input the correct password before entering Load Factory Defaultwhich is
used to restore the factory defaulting setting in DVB-T part. The default password is 0000.
After you enter this item a warning dialogue box pops up reading “This operation will load
default and erase all the channels that user added, continue?” . Click “Yes” to load the factory
default settings and “No” to cancel.
, the Easy Install menu pops up. Users
need to go
After the default settings of the DVB-T part are restored
through some initial setups with this menu.
4.4 Software Upgrade
Enter Software Upgrade to upgrade your DVB-T system. You can upgrade the software by RS-232.
Use [ ]/[ ] to select Upgrade By RS-232. Input the correct password before entering this item.
Upgrade by RS-232
1.Select a Transfer Mode, P2P(Point to Point)or P2M(Point to Multipoint).
2.When P2P is selected, select an upgrade typeALL, CODE, LOGO, COUNTRYBAND and DATABASE.
Select All To upgrade the software completely while select other options to upgrade thecorresponding
part of the software. For example, selectLOGO to upgrade the logo part only.
3.Move the highlight on Start, then press [ENTER] to start the upgrade process.
34