Inovalley CH02E-DVBT, Instruction Manual

Page: 32 / 36

DVB-T Operation
3.4.2 Sleep Timer
You can select a period of time, 10 min, in Sleep Timer after 30min, 60min, 90min or 120min ,
which the unit will automatically go into standby mode if it's not being used.
T hen the system begins timing and will enter sleeping mode in 10 minutes. The remaining time
is shown in the Remains item.
Select Off to disable this auto sleep function.
Press [Menu]/[Exit] to exit the menu.
Use the direction key [ ]/[ ] to select 10min for example, then press [ENTER] to confirm.
3.5 OSD Setting
Set Subtitle Display
When Subtitle Display is highlighted, press [ ]/[ ] to select Off, Standard or Teletext.
NOTE: If the on-playing program hasn't subtitle information, no subtitle information will be
shown regardless of the setting in this item.
Set the OSD (on-screen display) Transparency
When OSD Transparency is highlighted, press [ ]/[ ] to set the transparency of the OSD.
There are six levels for you to choose, 10%, 20%, 30%, 40%, 50% and Off (without transparency
effect).
Set the OSD Style
When OSD Style is highlighted, press [ ]/[ ] to select an OSD style.
Load Default OSD Setting
When Load Default OSD Setting is highlighted, press[ ENTER] to restore the default OSD settings.
Press [Exit]/[Menu] to exit.
32