Inovalley CH02E-DVBT, Instruction Manual

Page: 28 / 36

DVB-T Operation
2. Installation
There are three items in Installation item. They are Auto Scan, Channel Scan and Tuner Setting.
Use [ ]/[ ] to select one, then press [ENTER] to enter the corresponding item.
Press [Exit]/[Menu] to exit.
2.1 Auto Scan
Select a Scan Mode
Use [ ]/[ ] to select a scan mode, All or Free. If you want to scan all the channels, select All.
If you want to scan the free channels only, select Free. Begin Auto ScanPress [ ] to move the
highlight on Search, then press [ENTER] to start auto scanning for TV channels.
Press [Exit]/[Menu] to stop scanning.
2.2 Channel Scan
Select a Scan Mode
Use [ ]/[ ] to select a scan mode, By channel or Byfrequency.
Set the Frequency and Band WidthIf By Frequency is selected as the scan mode, setting items
Frequency and Band Width are available.Highlight Band Width, then Use [ ]/[ ] to select a
band width.
Highlight Frequency and press [ENTER], then use the digit keys and direction keys to set the
frequency that you want to scan.
Set the Scan Band and Channel NumberIf By Channel is selected as the scan mode, setting items
Scan Band and Ch No. are available.
Highlight Scan Band, then Use [ ]/[ ] to select VHF or UHF.
Highlight Ch No., then Use [ ]/[ ] to select a channel number.
After you finished, move the highlight on Search, press [ENTER] to start scanning channels.
Press [Exit]/[Menu] to stop scanning.
28