Inovalley CH02E-DVBT, Instruction Manual

Page: 21 / 36

DVB-T Operation
Press [SOURCE] repeatedly until it switches to DVB-Tmode.
Remote Control Function
Tobe used to select a program or input appropriate parameters.
RECALL Press to return to the last TV channel you tuned in.
TEXT
Press to display/hide teletext. Note: Teletext-enabled model supported only.
EPG Press to calls up or quit the EPG (electronic program guide).
PG+/- Press to turn over to the next/precious page of the program list.
EXIT Press to quit the current menu.
AUDIO
Press to enter the audio setup menu. Press it again to quit.
DVIEW
Press to preview the preset channels in a screen. Press it again to quit the preview mode.
TV/RADIO Press to switch between TV mode and RADIO mode.
INFO
Press to display the information of the current channel. Press it again to hide it.
CH+/-
Press to skip to the next/previous TV channel.
SUBTITLE
Press to enter or quit the subtitle display menu. Press it again to quit.
MENU Press to enter the DVB-T system main menu. Press it again to exit.
When you enter DVB-T mode for the first time or after it is loaded with the default settings of
the DVB-T part (Main Menu
Tool Load Factory Default),the Easy Install menu pops up.
Users need to go through some initial setups following the on-screen instructions.
Then move the highlight to OK and press [ENTER]to confirm and proceed to the Auto Scan
menu.The unit begins to do auto scanning for the available TV broadcasting channels.
After the process is finished, the main menu appears.
Use the direction key[ ]/[ ] to selecta country that you are in when REGION is highlighted.
LANGUAGE. Press the direction key[ ]/[ ] to select an on-screen display language.
Then press[ ] to move the highlight to OSD
NOTE If a wrong selection in REGION is made, the system may not be able to scan the TV
broadcasting stations.
21