13
Take the media across and below the
optical sensor
Pass the media under the lower rod
and over the upper rod
TIP: At the four (4) top rods, the
correct placement of the fleece is
OVER – UNDER – UNDER – OVER, as
shown in the picture.
WARNING: Incorrect placement of
the media through the rods might
lead undesired results that could void
warranty.
At the bottom of the unit, unscrew
both rods by turning the “X” shaped
knobs counter clockwise
By using the long “L” shape tool
provided, from the top, push the
media towards the bottom of the unit
Set the media towards one corner of
the bottom of the unit as shown
With the help of the tool, hold the
media in place while (if required) and
pry the rod through the opening and
over the media
Summary of Contents for X Filter 1.0
Page 1: ...Copyright Innovitech LTD ...
Page 25: ...25 ...
