16
Filter Media Replacement
When the media has finished or is about to finish, prepare to remove the old filter media by
slightly tilting the black box to unlock the direct drive.
ATTENTION: Before tilting the black
box, move the used media roll
manually back and forth to UNLOCK
the direct drive.
In case the black box won’t tilt, move
the spool slightly by hand while tilting
the black box to break the lock
While the direct drive is unlocked and
the old media is moving freely, there
are two options available
Option 1: Unroll the remaining media and remove the spool. Set the new media as explained in
the “Filter Media Installation” section
Option 2: Cut the old media loose, leaving the rest of the unused media on the unit. By using the
media left over, it can be used to pull the media in from a new roll
Remove the old media and dispose
appropriately
Note: The uptake spool may be
reused as many times required by
unwinding or cutting the old media.
The uptake spool might be disposed
with the old media or after natural
wear and tear (if reused).
The uptake spool is purchased
separately for a small fee.
Summary of Contents for X Filter 1.0
Page 1: ...Copyright Innovitech LTD ...
Page 25: ...25 ...
