5
The adjustable spacer should be
used for sump glass thickness up to
6mm. Above 6mm the spacer could
be removed. Removing and
adjusting the spacer
The spacer supports the unit to be
level.
IMPORTANT NOTICE: It’s important
the unit to be set as level as possible
in order for the optical sensor to
detect water level more accurately
and fully take advantage of the
fleece media
The hooks allow the unit to be set
into different heights
The middle holes provide the ideal
height, as the top section can move
over the sump glass
WARNING: Do not use the higher
section (upper holes) unless
absolutely necessary
HIGH RISK OF WATER SPILLING
OVER SUMP GLASS
There’s a second set of hooks
provided that are designed to
elevate the unit even higher in
order to obtain ideal water level for
the filter.
WARNING/DISCLAIMER: These
hooks should be used under your
own risk. There’s a risk of water
spilling over the sump glass if not
installed properly or excessive flow
is used.
Summary of Contents for X Filter 1.0
Page 1: ...Copyright Innovitech LTD ...
Page 25: ...25 ...
