Innovitech X Filter 1.0, User Manual

Page: 15 / 25

15
Hold the media tightly on the spool
until the spool is set to its final
destination otherwise there’s a risk
the media will unwind or not set
properly
TIP: Media sets better on the spool if
it’s wet.
By sliding the black box outwards,
clearance will be created from the
direct drive to let the spool sit into
place
Let the black box spring back into
position for the direct drive to come
into contact with the spool
Twist the spool if required for the
direct drive to lock into place
The button on the other end of the
black box is the manual media feed
Push the button to roll the media
manually
Apply pressure to the uptake spool if
required to achieve a tight fit of the
media on the spool
WARNING: Failure to achieve a tight
fit of the media on the spool, might
result to the media slipping under
pressure