17
Maintenance
After every media change, it’s suggested to wipe the optical sensor with a soft cloth to ensure
accuracy and precision is always in check
Ensure the sensor is wiped clean at the tip
Ensure that the filter is in good condition. There could be some excessive build-up of slime on
the rolls. The rolls are designed to be cleaned by the media (usually resulting by dirt patches on
the media), but it is advised to give the unit a thorough clean 1-4 times per year, depending on
water conditions.
TIP: If system is planned to be left unattended for a long period of time, it’s advised to give the
sensor and the unit a good clean and ensure a fresh media roll is installed.
Summary of Contents for X Filter 1.0
Page 1: ...Copyright Innovitech LTD ...
Page 25: ...25 ...
