© Copyright 2016
Innovience International BV
Al rights reserved. Whole or partial reproduction is not permitted
without the written authorization of the copyright owner.
User manual OptoXS
TM
Wifi module OXS-W11-EU
V 1.0, December 2016
Confidential
4
Chapter 1 Introduction
1.1 Product overview
The OptoXS
TM
Wifi module is dedicated to home and office wireless network solutions. It
allows for greater range and mobility within your wireless network. Increased mobility and
the absence of cabling will be beneficial for your network.
With using IEEE 802.11n wireless technology, your device can transmit wireless data at the
rate of up to 300Mbps. With multiple protection measures, including SSID broadcast control
and wireless LAN 64/128/-bit WEP encryption, Wifi protected Access (WPA2- PSK, WPA- PSK.
This device leverages some 802.11n features to provide improved performance and coverage
compared to 802.11a/g devices and fully interoperates with 802.11n products if they are
Wifi certified, but it does not conform to all of the requirements in the IEEE specification and
is not classified as "n" in a Wifi certified program.
It supports an easy, web-based setup for installation and management. Even though you
may not be familiar with the access point, you can easily configure it with the help of this
guide. Before installing the OptoXS
TM
Wifi module, please look through this guide to get the
full information.
1.2 Conventions
Parameters provided in the pictures are just references for setting up the product, which
may differ from the actual situation. You can set the parameters according to your demand.
1.3 Main Features
•
Wireless speed up to 300 Mbps
•
Support access point, multi-SSID, client, repeater
（
universal repeater
）
and bridge with
AP modes
•
SSID and VLAN support
•
Flexible deployment with POF connector
•
Supports web management
•
Backward compatible with 802.11b/g products
