© Copyright 2016
Innovience International BV
Al rights reserved. Whole or partial reproduction is not permitted
without the written authorization of the copyright owner.
User manual OptoXS
TM
Wifi module OXS-W11-EU
V 1.0, December 2016
Confidential
11
Method 2
In the current case the OptoXS
TM
W
ifi module has been assigned a IPv4 address “10.0.2.33”.
Now that we know the module’s IP address, we can continue to the L
ogin procedure. To
access the configuration utility, open a web-browser and type in the default address in the
address field of the browser.
After a moment, a login window will appear, similar to figure 3.2.
Figure 3.2
You should configure a password for your module. Go to the grey block above and navigate
to the last sentence “Go to password configuration”. Click on that sentence. The following
screen appears:
