(6.3) Interlock setting
In the case where the CO
2
and the dehumidification are interlocked, when the CO
2
regulation is
performed, the cooling is enabled, and the CO
2
regulation will be stopped, so the dehumidification will
be executed first.
7. Temperature parameter setting
interface
In the temperature parameter setting interface, the current real-time data and the working status of the
device are displayed in the upper part of the device.
If the device is not equipped with a temperature and humidity module, the relevant temperature and
humidity data of the 3 in 1 module will be used;
Meanwhile, the temperature parameters of the device will be displayed, such as working mode, low
temperature protection value, high temperature protection value, target value and deadband value.
(7.1) Temperature Setting
The [Heat] target value, [Cool] target value, [Deadband] value, [Low Temp Protection] value and
[High Temp Protection] value in this section are set respectively in day and night mode.
28