6. Humidity parameter setting interface
In the humidity parameter setting interface, the current real-time data and the working status of the
device are displayed in the upper part.
If the device is not equipped with temperature and humidity module, the relevant data of temperature,
humidity and CO
2
three-in-one module can be used; meanwhile, the humidity parameters of the
device will be displayed, such as working mode, low humidity protection value, high humidity protec-
tion value, target value, and deadband value.
After the data are set, the Save button will light up. At this time, press the Save button to save the data,
after which a dialogue box will pop up prompting you to save the data; the data modified will not take
effect unless they are saved.
(6.1) Humidity Setting
In this section, you can set the target value in the box behind [Humidify], target value in the box
behind [Dehumidify], deadband value in the box behind [Deadband], low humidity protection value
in the box behind [Low Humi Protection], high humidity protection value in the box behind [High
Humi Protection] respectively in the day and night mode.
26