5
Document Name : OIM V 1.0 Page 5 of 7
i
Latch
Output
Timer
Mode
Auto Reset Mode :-
In this mode once the timing cycle is over, Next start input
through External Input signal will Re-Start the timer. No need to issue Reset Signal.
Latched Mode :-
In this mode once the timing cycle is over, User must issue a Reset
signal from front key or Ext. Reset input to Re-Start the timer.
Timer Mode:-
This parameter will be prompted if other than power on start selected.
Timer Start Mode :-
This parameter defines the Start mode for the timer.
Power On Start :-
If Selected, timer starts counting from Power On.
Front Start :-
If Selected, Timer starts only after user presses START key. If the
cycle is incomplete at the time of power fail , It will continue after power is restored
without need for re-issuing the Start command from front key ( If MEM=On ).
Remote Edge T Level Start :-
If Selected, Timer starts counting only when it
detects high to low pulse at back terminal from external Input. The input signal
must remain high during timing cycle otherwise timer will Reset.
Remote Edge Positive Trigger Start :-
If Selected, Timer starts counting only when
it detects high to low pulse at back terminal from external Input.
Remote Edge Negative Trigger Start :- If Selected, Timer starts counting only when
it detects low to high pulse at back terminal from external Input.
Remote Edge T Level Start :-
If Selected, Timer starts counting only when it
detects low to high pulse at back terminal from external Input. The input signal
must remain low during timing cycle otherwise timer will Reset.
Power
On
Start
Timer
Start
Down
Timer
Direction
Timer Counting Direction:-
Up Counting:-
If Selected, timer starts counting from 0 to set time in ascending
order. ( Up direction )
Down Counting:-
If Selected, timer starts counting from Set time to 0 in
descending order. ( Down direction )
Range 2
Range : 9999 Hrs.
resolution : 1 Hrs.
Range : 999.9 Hrs.
Resolution : 0.1 Hrs.
Range : 99 Hrs. 59 Min.
Resolution : 1 Min.
Hrs
Sec
Min
Hrs
Min
Sec
Hrs
Min
Sec
TIMER RANGE & RESOLUTION
:
Range : 99.99 Sec.
Resolution : 0.01 Sec.
Range : 999.9 Sec.
Resolution : 0.1 Sec.
Range : 9999 Sec.
Resolution : 1 Sec.
Range : 99 Min. 59 Sec.
Resolution : 1 Sec.
Range : 999.9 Min.
Resolution : 0.1 Min.
Range : 9999 Min
Resolution : 1 Min.
Range : 99 Hrs. 59 Min.
Resolution : 1 Min.
Range : 999.9 Hrs.
Resolution : 0.1 Hrs.
Range : 9999 Hrs.
resolution : 1 Hrs.
9999
Sec.
Hold
Range
Min
Hrs
Min
Sec
Hrs
Sec
Min
Hrs
Sec
Hrs
Min
Sec
Hrs
Min
Sec
Hrs
Sec
Min
Hrs
Min
Sec
Hrs
Min
Sec
Hrs
Min
Sec
Default
Description
Parameter
Lower
Display
Upper
Display
