Operating Manual
DECT Telephones
- 7 -
4.
Phoning with the DECT telephone
In chapter 3, you successfully registered your DECT telephone with the innovaphone
PBX and logged on to a base station. This next chapter provides information on how to
use and operate the DECT telephone.
4.1. Setting up two connections
The possibilities for setting up two connections are as follows:
1. With a call on hold, you can make a call to another subscriber. You can make
consultations and transfer calls.
2. Someone tries to call you whilst you are on the phone. You can accept a waiting
call.
4.1.1 Waiting calls
Someone tries to call you whilst you are on the phone. The waiting call is not accepted
automatically. You can accept a waiting call using the key sequence
and 2.
Note:
A waiting caller is shown on your DECT telephone’s display only by their name or
number as per the factory settings. By using feature codes, you can control call
waiting whilst engaged in a telephone call. (See chapter 4.4)
4.1.2 Consultation and call transfer
Whilst connected with an active call partner, you can set up a new connection by calling
another subscriber. You have the possibility to transfer an active call.
1. Press the Consultation key
during a call. The active call partner is put on hold
and you can hear a dial tone. The active connection appears against a dark
background on your display.
2. A connection is set up to the call number dialled. If the subscriber answers, you
can make a consultation before the transfer.
Tip:
The connection set up is deleted again if you press the
key and 1 once more
before the consultation connection is set up.
3. Replace the handset
or press the Consultation key
and 4. The caller will
be connected.
Note:
The key sequence
and 2 allows you to switch between the call on hold and the
active call.
