background image

 

MULTI-MAX

 HIGH WALLS

OWNERS MANUAL

Precautions

WARNING

.

Do not block air outlet or air inlet. It may cause 

malfunction.

remote controller may be broken.

Power cord is overheating or damaged.

There’s abnormal sound during operation.

Circuit break trips off frequently.

Air conditioner gives off burning smell.

Indoor unit is leaking.

contact the dealer or qualified professionals for service.

When turning on or turning off the unit by emergency 

operation switch, please press this switch with an insulating 

object other than metal.

outlet. It may cause personal injury or damage.

WARNING

conditioner and disconnect power immediately, and then 

If the air conditioner operates under abnormal conditions, 

it may cause malfunction, electric shock or fire hazard.

Do not spill water on the remote controller, otherwise the 

electric shock or damage. Please contact dealer when 

you need to repair air conditioner. 

Do not repair air conditioner by yourself. It may cause 

objects. It may cause damage or personal injury.

Do not step on top panel of outdoor unit, or put heavy 

When below phenomenon occurs, please turn off air 

Do not extend fingers or objects into air inlet or air 

Maintenance must be performed by qualified 

professionals. Otherwise, it may cause personal injury 

or damage.

©2020 Innovair Corporation.  All Rights Reserved.

www.innovair.com

Summary of Contents for MULTI-MAX VWM10H25F









































Reviews: