innovair MULTI-MAX VWM10H25F Page 11 Owner'S Manual Download

Page: 11 / 40

MULTI-MAX

HIGH WALLS

OWNERS MANUAL

Introduction for buttons on remote controller

●

When selecting auto mode, air conditioner will operate automatically according

to ex-factory setting. Set temperature can't be adjusted and will not be

displayed as well. Press "FAN" button can adjust fan speed. Press "SWING"

button can adjust fan blowing angle.

●

A● After selecting cool mode, air conditioner will operate under cool mode.

Cool indicator on indoor unit is ON (This indicator is not available for some

models). Press "▲" or "▼" button to adjust set temperature. Press "FAN"

button to adjust fan speed. Press "SWING" button to adjust fan blowing angle.

●

When selecting dry mode, the air conditioner operates at low speed under dry

mode. Dry indicator " " on indoor unit is ON. Under dry mode, fan speed can’t

be adjusted. Press " " button to adjust fan blowing angle.

●

When selecting fan mode, the air conditioner will only blow fan, no cooling and

no heating. All indicators are OFF. Press "FAN" button to adjust fan speed. Press

" " button to adjust fan blowing angle.

●

When selecting heat mode, the air conditioner operates under heat mode. Heat

indicator on indoor unit is ON (This indicator is not available for some models).

Press "▲" or "▼" button to adjust set temperature. Press "FAN" button to adjust

fan speed. Press "SWING" button to adjust fan blowing angle. (Cooling only unit

won't receive heat mode signal. If setting heat mode with remote controller, press

ON/OFF button can't start up the unit)

Note:

●

For preventing cold air, after starting up heating mode, indoor unit will delay 1~5

minutes to blow air (actual delay time is depend on indoor ambient temperature).

●

Set temperature range from remote controller 16~30

℃

(61-

℉

); Fan speed:

auto, low speed medium speed, high speed.

Note:

●

After putting through the power, the air conditioner will give out a sound.

Operation indictor " " is ON (red indicator). After that, you can operate the air
conditioner by using remote controller.

ON/OFF button

Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator " " on indoor unit’s display is ON (green indicator.

The colour is different for different models), and indoor unit will give out a sound.

Press this button to select your required operation mode.

AUTO COOL

FAN

DRY

HEAT

MODE

button

Summary of Contents for MULTI-MAX VWM10H25F









































Search results

Summary of Contents for MULTI-MAX VWM10H25F

Reviews:

Related manuals for MULTI-MAX VWM10H25F

Brands by name

Popular brands

innovair MULTI-MAX VWM10H25F, Owner'S Manual

Search results

Summary of Contents for MULTI-MAX VWM10H25F

Reviews:

Related manuals for MULTI-MAX VWM10H25F

Brands by name

Popular brands