w w w . i n n o v a i r . c o m
MULTI-MAX
HIGH WALLS
OWNERS MANUAL
Introduction for buttons on remote controller
Pressing this button can set fan speed circularly as: auto (AUTO), low( ), medium
( ), high( ).
Auto
Press this button can select up&down swing angle. Fan blow angle can be selected
circularly as below:
●
When selecting " ", air conditioner is blowing fan automatically. Horizontal
louver will automatically swing up & down at maximum angle.
●
When selecting "
、
、
、 、
●
When selecting "
、 、
●
Hold " " button above 2s to set your required swing angle. When reaching your
required angle, release the button.
Note:
●
"
、 、
" may not be available. When air conditioner receives this signal, the
air conditioner will blow fan automatically.
SWING
button
no display
(horizontal louvers stops
at current position)
button
s
Press "
▲
" or "
▼
" button once increase or decrease set temperature 1
℃
(°F).
Holding "
▲
" or "
▼
" button, 2s later, set temperature on remote controller will
change quickly. On releasing button after setting is finished, temperature indicator
on indoor unit will change accordingly. (Temperature can't be adjust-ed under auto
mode)
When setting TIMER ON, TIMER OFF or CLOCK, press "
▲
" or "
▼
" button to
adjust time. (Refer to CLOCK, TIMER ON, TIMER OFF buttons)
FAN
button
9
/
Under AUTO speed, air conditioner will select proper fan speed automatically
according to ex-factory setting.
Fan speed under dry mode is low speed.
●
●
Notice