w w w . i n n o v a i r . c o m
MULTI-MAX
HIGH WALLS
OWNERS MANUAL
Introduction for buttons on remote controller
no display
●
When selecting " " or no display with remote controller, temperature indicator
on indoor unit displays set temperature.
●
When selecting " " with remote controller, temperature indicator on indoor unit
displays indoor ambient temperature.
●
When selecting " " with remote controller, temperature indicator on indoor unit
displays outdoor ambient temperature.
X-FAN
button
Press this button under cool and dry mode to start up x-fan function, and " " icon
on remote controller will be displayed. Press this button again to cancel x-fan
function, and " " icon will disappear.
Note:
●
When x-fan function is on, if the air conditioner is turned off, indoor fan will still
operate at low speed for a while to blow the residual water inside the air duct.
●
During x-fan operation, press X-FAN button to turn off x-fan function. Indoor fan
will stop operation immediately.
By pressing this button, you can see indoor set temperature, indoor ambient
temp-erature or outdoor ambient temperature on indoor unit’s display. The setting
on
remote controlleris selected circularly as below:
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. " " icon is displayed on remote controller. Press this button again
to exit turbo function and " " icon will disappear.
11
TEMP
button
TURBO
button
WiFi
button
Press "WiFi" button to turn on WiFi function. "WiFi" icon will be displayed on the
remote controller.
Hold "WiFi" button for 5s to turn off WiFi function and "WiFi" icon will disappear.
Under off status, press "MODE" and "WIFI" buttons simultaneously for 1sec, WiFi
module will restore factory settings.
