INSTALLATION INSTRUCTIONS
Indoor unit installation
1. Fitting the Installation Plate
1. Fit the installation plate horizontally
on structural parts of the wall with
spaces around the installation plate.
2. If the wall is made of brick, concrete or
the like, drill five or eight 5mm/O. 197in
diameter holes in the wall. Insert Clip
anchor for appropriate mounting screws.
Correct orientation
of Installation Plate
t
x
Fig.4
x
3. Fit the installation plate on the wall with
eight or five type A screws.
� 150mm/5.91 in or more to ceili
6
Indoor unit outline
Note:
Fit the Installation Plate and drill
holes in the wall according to the
wall structure and corresponding
mounting points on the installation
plate.
120mm/4.72in
or more to wall
¢=>
Left rear side
refrigerant
Pipe hole
<!>90/3.54in
c
- -
-
/_
A
120mm/4.72in
or more to wall
Right rear side
refrigerant pipe
hole <I> 90/3.54in
9000Btu/h models(A:680/26.77, B:255/10.04, C: 170/6.69, D:92/3.62)
12000Btu/h models(A:770/30.31, B:255/10.04, C:170/6.69, D:95/3. 7 4)
Indoor unit outline
�
150mm/5.91 in or more to ceilinb
c
,+-----,�--------·----
20mm/4.72in
(Dimensions are in mm & in unless
otherwise stated)
120mm/4.72in
I
I
or more to wall
¢::>
1::
I
I or more to wall
<=>
I
120mm/4.72in I
or more to wall I
Left rear side
refrigerant
Pipe hole
<!> 90/3.54in
Left rear side
"ig
I l'lo,(Jl./
1,;�
refrigerant
pipe hole
<1>90/3.54in
Right rear side
refrigerant
pipe
hole <I> 90/3.54
18000Btu/h models(A:905/35.63, B:275/10.83, C:80/3.15, D: 100/3.94)
I d
.t ti.
-'(),- 150mm/5.91 in or more to ceiling
n oor u
�
ou 1ne
,U,-
120mm/4.72in
or more to wall
Left rear side
refrigerant
Pipe hole
<!>90/3.54in
1 _
293/11.54 __ Installation plate
__
163/6.42
_
OD : :
: : OD
1030/40.55
22000Btu/h models
n 150mm/5.91 in or more to ceiling
1450/57.09
c--i 120mm/4.72in
� or more to wall
M ¢=>
ro
--------------------------�-
r-;l;tl:!:lt.l=,,��"""'���lltij�"""',=c����t:ll::tt.l=,,1-_J�
>30000Btu/h models
Fig.5
©2015 Innovair Corporation. All Rights Reserved.
www.innovair.com
