32
DISPLAY BRIGHTNESS
The Display Brightness sensor is factory-set to automatically adjust to the light of the room.
When the room is dark the display automatically dims. This automatic brightness adjustment
can be disabled, if desired.
TO DISABLE AUTO BRIGHTNESS
When the system is off, press and hold the
Power Key
for 10 seconds until
uul
appears.
Press the
+
key until
05
appears.
Press the
Power Key
.
Press the
+
Key
to select
ds
(for disable).
Press the
Power Key
once to activate the setting.
Press the and hold the
Power Key
once to save the setting, the display will turn
off after it has been saved.
TO RE-ENABLE AUTO BRIGHTNESS
When the system is off, press and hold the
Power Key
for 10 seconds until
uul
appears.
Press the
+
key until
05
appears.
Press the
Power Key
.
Press the
+
Key
to select
En
(for Enable).
Press the
Power Key
once to activate the setting.
Press the and hold the
Power Key
once to save the setting, the display will turn
off after it has been saved.
PROGRAMMING FEATURES
For systems with a
wall mounted controller
use these instructions to set display brightness, temperature limiting and
cool or heat only modes. For all set-up and programing refer to the user guide.
Summary of Contents for Ephoca HPAC 2.0
Page 1: ...1 INSTALLATION MANUAL 2020 ...
Page 9: ...9 ...
Page 17: ...17 NOTES ...
Page 35: ...35 NOTES ...
