Page 6 of 9
Edition 06/12/2014
INNOTECH
FAS 01-03
INNO
TECH
FAS 01-03
Check:
Pushing in horizontal direction
(Fig. 5), make sure that both locking bolts
A
and
B
are locked securely in place. You must not be able to shift the position
on either side
beyond
the ring marking
of anchor point
X
or
Y
. This means that at least 20 mm of the anchor pegs
must remain inside the window frame (Detail Fig. 5).
Attention:
locking bolts A and B must be locked securely in place!
Fig. 5
MAINTENANCE
All moving parts must be treated with acid-free lubricant at least once a year and as
needed.
Check the fall prevention system for windows for obvious defects prior to every use.
STORAGE
Always store the fall prevention system for windows in a dry location and with the spring
slackened.
ATTENTION
The FAS 01-03 fall prevention system for windows should only be inserted into original
and certified INNO
TECH
guide bushes.
Since using third-party guide bushes poses a safety risk, no liability will be assumed in
the event of damage caused by the use of such bushes.
