IV. Setting up MTA 3368 IP VideoPhone
Below is an illustration of the overall setup of the MTA 3368 IP VideoPhone.
Figure 1.1 Overall connection
A. Connecting IP VideoPhone
1. Connect up the accessories, which include the CCD camera, telephone
handset and cord to the videophone main body.
2. Please ensure CCD camera is compatible to the wall socket frequency
before connecting the camera to the videophone main body, refer to the
table below
Frequency Camera
50Hz PAL
60Hz NTSC
3. Plug your network cable (RJ45) into the 'UPLINK' connector at the back of
the unit.
4. Connect one end of the power adapter* to the '12V DC 1.5 A' power
connector at the back of the videophone unit and the other end to the wall
power supply.
Power Supply
Ethernet
Switch/ Hub
