iii
Flat Panel Sensors Operation Manual 897N200608
Introduction
The indirect-conversion flat panel sensor is a device which acquires a general radiograph.
The flat panel sensor is a component of RIC.
Available flat panel sensor is RIC 35G/RIC 43G/RIC 35C/RIC 43C/RIC 24C.
RIC 35G, RIC 43G, RIC 35C, RIC 43C and RIC 24C
:
Wireless communication mode or wired communication mode is available. When used in wireless
communication mode, an access point and battery pack (optional) are required.
Each flat panel sensor complies with IEC 62220-1 (MEDICAL ELECTRICAL EQUIPMENT -
CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - ) as a general X-ray radiography
equipment.
The detector of flat panel sensors features 150 micron pixel pitch, a wide 16-bit dynamic range and
exposure times up to 3.8 seconds.
This Operation Manual includes descriptions of matters necessary when using the flat panel sensor
such as the equipment overview, operation procedures and precautions to observe, as well as daily
inspections and maintenance.
Accompanying documents were originally drafted in the English language.
Installation may only be conducted by authorized service personnel.
CAUTIONS
1. No part or all of this manual may be reproduced in any form without prior permission.
2. The information contained in this manual may be subject to change without prior notice.
3. INNOLUX Corporation shall not be liable for malfunctions and damages resulting from
installation, relocation, remodeling, maintenance, and repair performed by other than dealers
specified by INNOLUX Corporation.
4. INNOLUX Corporation shall not be liable for malfunctions and damages of INNOLUX
Corporation products due to products of other manufacturers not supplied by INNOLUX
Corporation.
5. INNOLUX Corporation shall not be liable for malfunctions and damages resulting from
remodeling, maintenance, and repair using repair parts other than those specified by
INNOLUX Corporation.
6. INNOLUX Corporation shall not be liable for malfunctions and damages resulting from
negligence of precautions and operating methods contained in this manual.
7. INNOLUX Corporation shall not be liable for malfunctions and damages resulting from use
under environment conditions outside the range of using conditions for this product such as
power supply, installation environment, etc. contained in this manual.
8. INNOLUX Corporation shall not be liable for malfunctions and damages resulting from
natural disasters such as fires, earthquakes, floods, lightning, etc.
This system is classified as a medical device under EC Directive 93/42/EEC.
Process waste correctly, as stipulated by local law or any regulations that apply.
Caution : Rx Only in the United States
(Federal law restricts this device to sale by or on the order
of a physician.)
