background image

2-5

System Configuration (Product Overview)

2

Flat Panel Sensors Operation Manual   897N200608

2.3.2  Safety and Other Symbols

The following safety symbols are used in the labels or on its body.

Symbol

Description

CE marking

Protective earth (ground)

Direct current

This symbol indicates that the equipment is a Type B Applied Part.

Ready (To indicate the machine is ready for operation.)

Electric energy

General mandatory action sign

This symbol indicates that this product is not to be disposed of with your household waste, according 

to the WEEE Directive (2002/96/EC) and your national law. This product should be handed over to a 

designated collection point.

Improper handling of this type of waste could have a possible negative impact on the environment 

and human health due to potentially hazardous substances that are generally associated with EEE.

At the same time, your cooperation in the correct disposal of this product will contribute to the 

effective usage of natural resources.

For more information about waste, please contact our official dealer or INNOLUX Representative.

Year of manufacture

Caution for local load / Do not drop the flat panel sensor to the user/patient

Entire surface load 

This symbol includes RF transmitters or indicates equipment that intentionally applies RF 

electromagnetic energy for diagnosis or treatment.

Refer to Instruction Manual/Booklet

This symbol indicates that the part is not a battery.

This symbol instructs the user not to disconnect the SE cable during use.

Summary of Contents for RIC 24C















































Reviews: