Innolas Laser nanio Series, User And Installation Manual

Page: 36 / 48

WARNING
Risk of injury or damage to equipment
The laser head is heavy. Transport it using the handles provided and fasten it in
position firmly using appropriate bolts and dowels.
The support framework must be sufficient to provide a solid and safe fixing.
7.2.1. Laser head
The laser head can be mounted from the bottom (recommended) or from either side
face. A three-point fixing is provided in each case together with a precision hole and
slot to locate on dowel pins on the system support framework. This assures accurate
and stable beam pointing.
1. Locate the laser head onto two dowel pins that are securely fixed to the system
support framework, then firmly fix the head in position using three bolts. For
bottom mounting, the bolts are screwed into the support framework and a spring
compression device allows for expansion of the head or support whilst
maintaining accurate location. For side fixing, the bolts are screwed through the
support into threaded holes (M6) in the head.
2. Remove the protection plate from the beam output window. Keep the plate to be
used for later transportation.
CAUTION
Risk of optical damage
Do not touch the beam output window or place it under mechanical stress.
7.2.2. Power supply
The power supply is designed to fit into a 19–inch rack. Ensure that the rack is fitted
with rails sufficient to support the weight of the power supply.
Never rely on the front plate fixing holes to support the full weight of the unit.
Position the power supply so that the emission warning lamp and other status lamps
are visible during operation.
7.2.3. Chiller
The chiller is designed to fit into a 19–inch rack. Ensure that the rack is fitted with rails
sufficient to support the weight of the chiller.
Never rely on the front plate fixing holes to support the full weight of the unit.
Position the chiller so that there is clear access to the filler and drain.
InnoLas Laser GmbH
7. Installation 28