Innolas Laser nanio Series, User And Installation Manual

Page: 16 / 48

• Laser crystal and resonator mirrors
• Intra-cavity accousto-optic Q-switch
Note: The Q-switch driver can be mounted on the left or right-hand side of the resonator
module, depending on the mounting method chosen for the laser head.
• Intra-cavity safety shutter with dual-redundant closure detector
In addition, it can be fitted with harmonic generation and separation modules and an
external accousto-optic modulator.
All connectors can be supplied in either inline or 90° configurations.
2.3. Power Supply
Figure 8 - Power supply
The power supply is common to all nanio lasers. This provides maximum flexibility
and minimises spare part holdings. An output is provided for the chiller. Water/water
chillers are both powered and controlled from the power supply. Water/air chillers use
an independent mains electrical connection but are controlled from the power supply.
The power supply is designed to fit into a 19–inch rack and is 2RU high.
2.4. Chiller options
2.4.1. Water/air
Figure 9 - Water/air chiller
The water/air chiller is recommended for low average power or low duty cycle
applications. It is designed to fit into a 19–inch rack and is available in low power (5RU
high) or medium power (6RU high) versions.
Water/air chillers require an unrestricted flow of air at less than 40°C.
InnoLas Laser GmbH
2. General Description 8