Innolas Laser nanio Series, User And Installation Manual

Page: 29 / 48

5. Routine maintenance
DANGER
Risk of electrocution
Switch off the system and disconnect it from the AC mains supply before
carrying out any maintenance.
Important!
After performing maintenance, always run a complete check on the system
before putting it into production.
5.1. Safety compliance checks
Frequency:
Weekly
1. Check all emission warning lamps function and are clearly visible.
2. Check that all safety labels are present.
3. Check the correct functioning of Emergency Stop and external interlocks.
5.2. Chiller
5.2.1. General checks
Frequency:
Monthly
1. Check that the pump is running quietly.
2. Check for water leaks.
3. Monitor the water level and top up if required via the filler tube or level sight tube,
depending on the chiller model.
5.2.2. Water/water
Frequency:
6–monthly or as required
Tools required for this procedure
None
Materials required for this procedure
• Filter/deioniser cartridge
DANGER
Risk of electrocution
Switch off and disconnect the system from the AC mains supply before
draining/filling the coolant tank or changing the filter/deioniser cartridge.
1. Switch off and disconnect the system from the AC mains supply.
nanio Industrial DPSS Laser User and Installation Manual
21 5. Routine maintenance