Innoband 8860-C1, User Manual

Page: 39 / 128

Chapter 4: Configuration 38
Username: Enter the username provided by your service provider. You can input up to 128 alphanumeric
characters (case sensitive). Please check with your service provider on the exact string to enter here.
Password: Enter the password provided by your service provider. You can input up to 128 alphanumeric
characters (case sensitive). Please check with your service provider on the exact string to enter here.
IP Address: Specify an IP address allowed to logon and access the gateway’s web server.
Note: IP 0.0.0.0 indicates all users who are connected to this gateway are allowed to logon the device and modify the
settings on this device.
Authentication Protocol Type: Default is Chap (Auto). Your ISP will advise you whether to use Chap or
Pap.
Connection:
Always on: A PPPoA session will be established upon device power on and the connection will
remain live or connected.
Connect on Demand: If you want to establish a PPPoA session only when there is a packet
requesting access to the Internet (i.e. when a program on your computer attempts to access the
Internet).
Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on the line for a
predetermined period of time.
Detail: You can define the destination port and packet type (TCP/UDP) without checking by timer. It
allows you to set which outgoing traffic will not trigger and reset the idle timer.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific headers)
that IP will attempt to send through the interface.
TCP MSS Clamp: This option helps to discover the optimal MTU size automatically. Default is enabled.