44 / 68
Item
Description
Steer Balance
Run the Steer Balance calibration if you detect your INMOTION SCV anyway turns to a certain
direction when it stands in balance.
Footboard Mat Sensor
Calibrate the Footboard Mat sensors to level up the sensitivity.
RTC Time
Adjust time with assistance of GPRS and GPS.
Select an open area when you are about to activate the Self-examination Mode.
Park the INMOTION SCV on the ground and keep one meter distance.
Make sure the Handlebar is vertical. Do not pull the Turning Shaft or hold the Handlebar.
Do not place anything on the Footboard Mat, including your feet.
Doing so could interfere with the result of self-examination and causing injury or damage.
3.7. Safety Alerts
The INMOTION SCV is equipped with multiple safety alerts. It is important to understand these alerts before you attempt to
drive your INMOTION SCV.
3.7.1.
Speed Limiter
Because the motor power of INMOTION SCV is limited, when you approach the maximum allowed speed for a given
situation, the INMOTION SCV will push the handlebar back to slow you down. The following figure shows the process of speed
limiter.
The INMOTION SCV’s Speed Limiter is an alert that you are moving too fast. When the INMOTION SCV pushes the
Summary of Contents for SCV R1
