7
© 2002 - INLINE, Inc.
IN1401 Operation Manual - v1.5 7/12/02 11:18 AM
VIDEO MENU
BRIGHTNESS - Changes the input signal brightness
CONTRAST - Changes the input signal contrast
COLOR - Changes the input signal gain (contrast) for each individual color. Red, green and
blue are available.
INPUT MENU
H-BLANKING - The number of pixels per line inside the blanking area that is on the left side
of the active area (including the horizontal sync width and the horizontal back porch).
V-BLANKING - The number of lines per frame inside the blanking area that is above the active
area (including the vertical sync height and the vertical back porch).
ACTIVE PIXELS - The number of pixels per line inside the active input area.
ACTIVE LINES - The number of lines per frame inside the input active area. For interlaced
input signals, this number refers to the lines per frame after de-interlacing, not the
number of lines per field.
TOTAL PIXELS - The total number of pixels per line including the blanking on both sides of
the input active area (active, horizontal sync width, back porch and front porch). Refer to
the Input Settings section on pages 8-11 to determine how to set the total pixels. The
total number of lines per frame including the blanking above and below the active area is
determined by the input signal and cannot be adjusted by the user.
PHASE - Adjusts the amount of phase shift applied to the input signal.
SCAN TYPE - Three options are available:
•
Interlaced - for interlaced signals
•
Swap fields - to switch the interlaced fields (if necessary)
•
Invert Sync - to switch the sync polarity (if necessary)
