4
IN1401 Operation Manual - v1.5 7/12/02 11:18 AM
© 2002 - INLINE, Inc.
3. Connect the monitor, flat panel or other VGA display device directly to the IN1401 output port
using a standard 15-pin HD male-to-male VGA cable. INLINE’s IN8000M Series VGA cables
offer exceptional performance and are available in a variety of lengths.
4. Connect power to the IN1401 using the IN9230 IEC power cable (included).
5. Turn on the video source, the IN1401 and the monitor. The scaler has been factory pre-set to
support plug and play operation with most display devices. If it becomes necessary to manually
adjust / fine-tune the video image, refer to the INPUT SETTINGS section on pages 8 - 11 to
achieve optimum picture quality.
IN1401 APPLICATION DIAGRAM
!
H/C
V
B
G/Gs
R
FUSE; 0.5 A; 250 V; TIME DELAY
90-260 VAC; 0.20 A; 47-63 HZ
TECHNICAL SUPPORT: (800)882-7117
(714)921-4100
www.inlineinc.com
INPUT
IN1401 RGB Video Scaler
Monitor
IN1401 REAR VIEW
Video Microscope with RGB output
MENU
ENTER
OUTPUT
TX GND RX
RS- 23 2
IN1401 FRONT VIEW
Flat Panel Display
Process Controller
Document Camera with RGB output
