Installation manual
General Description
11
•
Previdia-Ultravox
control panel in single cabinet with fire detection and voice evacuation
functions The control panel includes the modules:
- FPMCPU, main CPU unit with display
- FPAMIAS: control panel with display for EVAC/PA voice functions
- IFAMPSU, power-supply module capable of supplying current up to 1KWatt at
27.6V
- IFAMEVAC: audio matrix module for signals processing
- IFAMAMP: 250W audio amplifier module
- PTT microphone
- IFM2L - module for the management of two loop circuits for devices
distributed in the protected area.
Two types of modules can be added to the basic control panels:
•
Front-plate modules
modules to be mounted on the cabinet front plate:
- FPMCPU, main CPU unit with display, essential for the fire detection
functions
if required, a second CPU unit can be installed inside the cabinet. This
second CPU will take over in the event of fault status on the main unit and
by so doing will disable the main CPU completely.
- FPAMIAS: control panel with display for EVAC/PA voice functions.
- FPMNUL - plastic support (provide no functions other than support)
- FPMLED - signalling module with 50 individually programmable tricolour
LEDs
- FPMLEDPRN - signalling module with 50 individually programmable
tricolour LEDs and an 80mm printer
- FPMEXT - extinguishant channel status module, to be used when the
control panel is equipped with modules for the management of automatic
fire-extinguishant systems (IFMEXT).
•
IFAM and IFM modules
internal modules, which must be mounted inside the cabinet through
the use of an interconnection bar:
-IFAMPSU, power-supply module capable of supplying current up to
1KWatt at 27.6V
-IFAMEVAC: audio matrix module for signals processing
-IFAMAMP: 250W audio amplifier module
-IFAMIDANET, module for connecting the control panel to the
IDANet network
-IFAMFFT, module with 4 lines for emergency telephones
-IFM24160, power-supply module, to be mounted in the first position
at the top on the bar
-IFM2L - module for the management of two loop circuits for devices
distributed in the protected area.
-IFM4R - module with 4 programmable relays
-IFM4IO - module with 4 supervised power inputs/outputs
-IFMDIAL - module for dialler communications over PSTN or GSM
networks and GPRS connection management
-IFM16IO - module with 16 low-power inputs/outputs
-IFMNET - module for the connection of control panels in a
network
-IFMLAN - module for advanced TCP-IP service management (Video
verification, Web Interface Web, e-mail, etc.)
-IFMEXT - module for gas-extinguishant system management
