SmartLink functions
13
Installation and programming manual
CONTROLLED OUTPUT
This is an output whose status can be controlled (activated/
deactivated) and used for other activations.
DOUBLE ZONE
An electrical input point used for the management/control of signals
coming from two devices.
The terminal the zone is connected to must be configured as a
“double input zone". Terminals with this configuration allow the
system to distinguish between two distinct alarms coming from the
two different zones it is connected to.
3-3
Event activations
The SmartLink is capable of recognizing specific external signals
coming from the PSTN or GSM network or through input terminals
T1, T5, and also internal signals from elements such as “events”.
When such events activate or restore (return to default conditions),
the SmartLink can perform any of the following activations:
•
activate outputs
•
generate voice calls
•
send digital protocol messages
•
send SMS messages
In
Appendix A, Events
you can find the complete list of events
generated by the SmartLink.
3-4
Dialler function
DIGITAL
The digital dialler function generates digital-protocol calls directly to
alarm receiving centres.
The available protocols are: Ademco 10bps, Ademco 14bps, Franklin
20bps, Radionics 40bps, Scantronic 10bps, Contact-ID, SIA-IP
SMS FUNCTION
The SMS dialler function generates outgoing SMS messages. The
outgoing SMS messages are sent in response to an event.
During the programming phase you can select the SMS message
type, which can be automatic, predefined by the SmartLink or
customized by the installer.
VOICE
The voice-dialler function activates outgoing calls containing
recorded voice messages.
During the programming phase you can select the voice messages,
which can be either predefined by the SmartLink or customized by
the installer.
ATTENTION!
INIM does not guarantee the total availability of all the GSM
functions described in this manual, due to the various combinations
of GSM service providers, SIM types and telephone models that may
be in use.
