SmartLink project development and programming
27
Installation and programming manual
Chapter 6
SMARTLINK PROJECT
DEVELOPMENT AND
PROGRAMMING
The SmartLink system has been designed to be programmed via PC.
All functions relating to project development and programming can
be accessed through the software programme. You will need:
•
A computer connectable to the SmartLink, ultimately already
installed
•
The SmartLeague software programme
6-1
Using the SmartLeague
software programme
The SmartLeague software programme allows the installer to
prepare the majority of the programming parameters without
actually being connected to the SmartLink device.
However, connection is required during the upload (to the
SmartLink) and download (from the SmartLink) operations. The
type of connection depends on the means used (refer to
paragraph
4-7 PC Connection
).
The programming parameters of an installation constitute the
“solution”. The solution can be saved to the memory of the
SmartLeague software programme, either for future use or as a
“model” for other installations.
The homepage of the SmartLeague software programme is common
to all the programmable devices and is always active, even during
the programming session, in the form of a template:
