14
SmartLink functions
Telephone dialler
3-5
Command and Shortcuts
A command is a request from the end-user or a device to the
SmartLink to carry out one or more of its functions.
SHORTCUTS
During the programming phase of the SmartLink you can arrange
the commands into shortcuts. A shortcut is a single request that
activates a series of successive functions. If necessary, you can
define the shortcut parameter, in other words, the object of the
shortcut (e.g. define a specific output for functions such as “activate
output” shortcuts).
3-6
Remote activation
All the functions of the SmartLink device can be activated from
remote locations.
Therefore, it is possible to send commands to the SmartLink by
means of:
•
SMS messages
•
telephone calls using Caller ID
•
telephone calls assisted by a voice guide (“Answerphone”
function)
After receiving one of the above-mentioned commands, the
SmartLink will activate the associated actions.
Both commands and their associated actions can be configured
through the SmartLeague software programme, in the sections
relative to the GSM network commands and user codes.
Table 9:
Available shortcuts
description
function
parameter
note
Arm/Disarm
Applies a pre-set scenario
which scenario
Shortcuts are available only
when the SmartLink is
programmed as an intrusion
control panel
Stop alarms
Deactivates instantly the outputs activated
by alarm and tamper events
Delete memory
Carries out a “Stop alarms” operation and,
at the same time, deletes alarm and
tamper memories.
Clear call queue
Cancels the call queue and stops ongoing
calls (if any).
Output activation
Activates one of the programmed outputs
which output
Output
deactivation
Deactivates one of the programmed
outputs
which output
Voice info
Starts playback of the audible message
playback that informs the user of the
device status
Shortcuts available for codes
only
Status enquiry
Activates a device status enquiry; the user
will receive one or more SMS messages
containing a list of the parameter values
relating to the status.
Refer to the default
commands described in
paragraph 3-6 Remote
activation
Credit enquiry
Activates balance enquiries relating to the
SIM card of the device; the user will receive
an SMS text indicating the remaining
credit.
GPRS Client
Activates the GPRS connection with the
SmartLeague software programme via SMS
