Ingeteam AAX0057, User Manual

Page: 34 / 114

Discovery in local mode
You can see the card’s IP address along with other data by connecting to it locally. To do so, follow these steps.
1. Connect the card to the local network.
2. Open the INGECON SUN Manager software.
3. In the top menu Utils access Discover devices in your local area network .
4. Indicate the local network in which the card is located. Click Next .
5. The next screen displays the list of the cards found on the local network.
From this screen you can restart or perform a factory reset of any of the found cards.
You can also export a CSV and generate an inventory of all cards on the local network.
6. Select the corresponding card, identified by its serial number. Click Next .
7. On the following screen the card can be configured with a static or dynamic IP via DHCP and you can also
configure the DNS. After completing the configuration click Next .
8. Confirm the changes made in the final window.
Web browser
The cards have a web server that displays the card’s IP address along with its information. From this website you
can make configuration changes.
You can access the web server by writing the card’s IP address on any browser.
http://192.168.1.2/
Card configuration web browser (example)
The available options within the menu may vary depending on the type of card.
These are the main options:
Status
Display the card’s general status, time, firmware version, serial number, if connected to the Ingeteam server, etc.
Ethernet
This allows you to configure the network parameters of the card’s Ethernet interface.
Wi-Fi
This displays the card’s Wi-Fi status. This also allows you to configure the operating mode, the SSID to which the
card connects to and the network parameters.
Network services
This allows you to configure the network services, along with the DNS.
34
Communication accessories Ingeteam
AAX2023IQM02_A - User manual